1 / 5
Hinged Pumpkin Candy Bowl | Trick-or-Treat Jar — image 1
1 / 5

Hinged Pumpkin Candy Bowl | Trick-or-Treat Jar

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Ribbed pumpkin candy jar with a hinged lid.

Rating
0 / 5
Likes
2
Downloads
3
Makes
0
Views
18
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

A ribbed pumpkin candy bowl for trick-or-treaters, with a lid that stays attached to the pumpkin by a real hinge. Flip it open, grab a sweet, flip it closed.

Designed for single-color printing: one spool of orange PLA, no AMS or multicolor needed.

 

FEATURES

  • 8-rib pumpkin shape with a squat, classic silhouette

  • Hinged lid (opens past 90°), so it can't get lost or dropped

  • Stem doubles as a handle for opening the lid

  • Flat base, stands securely

  • ~90 mm wide opening, easy for small hands to reach in

  • Lightweight: thin 1.8 mm walls, about 85 g of filament in total

 

SIZE

  • Small fits any common print bed

PRINTING

  • Two parts: body and lid. Print each one in the orientation it sits on the table (both flat bottom, nothing to rotate)

  • Material: PLA

  • Layer height: 0.24 mm

  • Walls: 2 (the body is basically all walls)

  • Infill: 9% (only matters for the lid)

  • Supports: lid none. Body: the curve right above the flat bottom is a slightly steep overhang. Most printers handle it with good cooling. If yours sags there, use tree supports touching the build plate only.

 

ASSEMBLY (HINGE PIN)

The hinge pin is a piece of your 1.75 mm filament:

  1. Put the lid on the body and line up the three hinge knuckles at the back

  2. Push a ~38 mm piece of 1.75 mm filament through the 2.2 mm hole

  3. (optional) Slightly melt or squash both ends (lighter, soldering iron, or a hot nozzle) so the pin can't slide out

 

Done! Fill with candy and put it on the doorstep.

Tags