PCO 1881 and PCO 1810 Bottle Neck Go No-Go Gauge (28 mm PET) - Concept, not print-tested
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Flat go/no-go pocket gauge for 28 mm PET bottle necks (PCO 1881/1810). Concept, not print-tested.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 1
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
A flat pocket gauge for quick checks of 28 mm PET bottle necks (PCO 1881 and the older, taller PCO 1810 finish).
GO hole (27.75 mm): a good thread outer diameter (T) should pass.
NO GO hole (27.15 mm): a good thread should NOT pass (undersize check).
RING hole (33.6 mm): the support ring should pass with little play.
Two labelled height steps, 17 mm (PCO 1881) and 21 mm (PCO 1810): compare against the neck height from top to support ring.
Reference dimensions from public sources:
PCO 1881: thread T 27.40 mm (plus or minus 0.13), support ring 33.0 mm, height 17.00 mm, pitch 2.7 mm.
PCO 1810: thread T 27.43 mm (plus or minus 0.13), support ring 33.00 mm (plus 0.38), height 21.00 mm, pitch 3.18 mm.
Sources: Alcoa PCO 1810 neck finish specification drawing (1998 revision); Multi Design Packaging neck finish glossary (GME 32.03 and GME 32.04); Gotmar PCO preform and closure datasheet; XEM Studio PET bottle neck reference sheet. The ISBT PCO 1881 master drawing itself was not accessible.
Hole sizes include print clearance. Status: CONCEPT, NOT PRINT-TESTED. Printers vary, so verify printed holes with a caliper before use. Not a certified measuring tool.
Designed by Anton Klitin, CAD engineer (CadQuery, FreeCAD). Open to freelance CAD work.