1 / 5
Daiwa 1000C Spool Click Claw " Spool Clicker" — image 1
1 / 5

Daiwa 1000C Spool Click Claw " Spool Clicker"

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A replacement part for the vintage Daiwa 1000C Spinning Reel. The plastic spool "clicker" underneath the spool.

Rating
0 / 5
Likes
0
Downloads
0
Makes
0
Views
5
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

This is Diawa Part 7 in the attached diagram in the Documentation Below

Part Number on the Daiwa Diagram at Mike's Reel Repair is 6-030-4511

DAIWA SPINNING 1000C(78-41)

 

A replacement 3d Printed part for the vintage Daiwa 1000C Spinning Reel. The original plastic clicker underneath the spool breaks often and is hard to find as the reel (and parts) haven't been manufactured for decades. I bought a brand new spool off of ebay and modelled this piece off the original plastic clicker underneath the spool for my Daiwa 1000C. 

 

Yay for my intro to 3d Modelling and Tinkercad. 

 

Use a M2.5x5mm screw or a M2.5x6mm with a small nut/washers as spacers to hold the printed clicker in the screw hole.

 

Feel free to make it better. It works just good enough in my Daiwa 1000C reel. I used generic PLA to print this. 

Tags