Replacement leaver for GREENWORKS lawnmower switch
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model is a replacement for leaver switch on Greenworks lawnmower G40LM35
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 15
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This model replaces the mechanical leaver of GREENWORKS lawnmower G40LM35.
It is not 1:1. I took the liberty of modifying the most critical part that broke.
I would suggest to add part modifier as seen in picture to ensure strength in the critical part.
Postprocessing:
After printing, remove all supports. I needed to slightly larger holes so I used 10mm drill bit for the larger/center hole and 2mm drill for spring hole.
Print settings:
layer height: 0.2
walls: 7
Top/bottom: 5
infill: 25% gyroid
supports: tree (slim) 35°
Modifier settings:
100% infill
Material:
PETG/ASA recommended