1 / 4
IKEA SUNNEBY cord clamp – clip-on counterpart (snap-fit replacement part) — image 1
1 / 4

IKEA SUNNEBY cord clamp – clip-on counterpart (snap-fit replacement part)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Missing second half of the SUNNEBY cord clamp. Snaps onto CLAMP_01 with a clear click; the original screw fits as is.

Rating
0 / 5
Likes
0
Downloads
1
Makes
0
Views
8
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

My IKEA SUNNEBY pendant lamp came without the second half of the cord clamp. The first half already exists as a model (CLAMP_01 by Pedersen 3D, linked as the original), so I designed the matching counterpart. You need both parts: print CLAMP_01 from the original model plus this part.

How it works

• Two tongues locate in the pockets of CLAMP_01's cone.

• The snap sleeve wraps around the threaded tube like a C-clip (0.5 mm undercut per side) and locks with a clear click.

• Two small beads sit in the tube's grooves and prevent rotation.

• The original screw threads into CLAMP_01 as usual.

Assembly

Step 1: Slide CLAMP_01 sideways onto the cord through its slot.

Step 2: Push this part straight on from the open side until the tongues sit in the pockets.

Step 3: Press firmly on the sleeve until it clicks.

Step 4: Screw in the original screw.

Print settings

• Material: PETG (or ASA). PLA works but is more brittle when snapping.

• Orientation: upright, cone tip down

• Supports: tree supports, under the flange only

• Layer height: 0.12 to 0.16 mm

• 4 walls, 100 % infill, scale 100 %

• Ideally print with the same printer and material as CLAMP_01.

Deutsch

Die fehlende zweite Hälfte der SUNNEBY Kabelklemme. Rastet mit hörbarem Klick an CLAMP_01 ein, die Original-Schraube passt. Druck: PETG, stehend mit Konusspitze nach unten, Baumstützen nur unter dem Flansch, 4 Wände, 100 % Füllung.

Disclaimer: Not an original IKEA part and not affiliated with IKEA. "IKEA" and "SUNNEBY" are used only to describe compatibility. Use at your own risk; do not exceed the lamp's rated load (1.8 kg per IKEA).

Tags