1 / 4
IKEA SUNNEBY cord clamp – clip-on counterpart (snap-fit replacement part) — zdjęcie 1
1 / 4

IKEA SUNNEBY cord clamp – clip-on counterpart (snap-fit replacement part)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Missing second half of the SUNNEBY cord clamp. Snaps onto CLAMP_01 with a clear click; the original screw fits as is.

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
8
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

My IKEA SUNNEBY pendant lamp came without the second half of the cord clamp. The first half already exists as a model (CLAMP_01 by Pedersen 3D, linked as the original), so I designed the matching counterpart. You need both parts: print CLAMP_01 from the original model plus this part.

How it works

• Two tongues locate in the pockets of CLAMP_01's cone.

• The snap sleeve wraps around the threaded tube like a C-clip (0.5 mm undercut per side) and locks with a clear click.

• Two small beads sit in the tube's grooves and prevent rotation.

• The original screw threads into CLAMP_01 as usual.

Assembly

Step 1: Slide CLAMP_01 sideways onto the cord through its slot.

Step 2: Push this part straight on from the open side until the tongues sit in the pockets.

Step 3: Press firmly on the sleeve until it clicks.

Step 4: Screw in the original screw.

Print settings

• Material: PETG (or ASA). PLA works but is more brittle when snapping.

• Orientation: upright, cone tip down

• Supports: tree supports, under the flange only

• Layer height: 0.12 to 0.16 mm

• 4 walls, 100 % infill, scale 100 %

• Ideally print with the same printer and material as CLAMP_01.

Deutsch

Die fehlende zweite Hälfte der SUNNEBY Kabelklemme. Rastet mit hörbarem Klick an CLAMP_01 ein, die Original-Schraube passt. Druck: PETG, stehend mit Konusspitze nach unten, Baumstützen nur unter dem Flansch, 4 Wände, 100 % Füllung.

Disclaimer: Not an original IKEA part and not affiliated with IKEA. "IKEA" and "SUNNEBY" are used only to describe compatibility. Use at your own risk; do not exceed the lamp's rated load (1.8 kg per IKEA).

Tagi