1 / 5
Sony Handycam Camcorder Screen Sunhood / Sunshade (Anti-Close Lock) — image 1
1 / 5

Sony Handycam Camcorder Screen Sunhood / Sunshade (Anti-Close Lock)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Custom fit sunhood for Sony Handycam (DCR-SX83 and similar models). It eliminates screen glare in sunny weather and work

Rating
0 / 5
Likes
0
Downloads
1
Makes
0
Views
13
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

[ENG]

A custom-designed rigid sunhood for vintage and digital Sony Handycam camcorders (tested on DCR-SX83). Features: - Eliminates screen glare in bright sunlight. - Works as a mechanical lock to keep the swivel screen open during dynamic shoots. - Features custom "filalab" branding on the inside. PRINT & FIT INSTRUCTIONS (Important 3D-Print Hack): 1. Print strictly using PETG (PLA will melt in the sun). 2. Use a lighter or a heat gun to slightly and carefully warm up the mounting flange until it becomes thermo-plastic (soft). Do not overheat! 3. Quickly press the warm sunhood onto your camera's screen frame to form a perfect tight fit. 4. Hold for 5 seconds, then immediately remove it so the heat doesn't damage the LCD screen. 5. Let it cool down completely. Enjoy your perfect custom fit! *** [

RUS]

Кастомный жесткий козырек для видеокамер Sony Handycam (протестировано на модели DCR-SX83). Особенности: - Полностью убирает блики на экране при съемке на солнце. - Работает как жесткий фиксатор-стопор, не позволяя экрану захлопнуться от тряски во время съемки. - Внутри вырезано фирменное клеймо "filalab". ИНСТРУКЦИЯ ПО ПЕЧАТИ И ПОДГОНКЕ (Важный лайфхак): 1. Печатайте строго из PETG (PLA расплавится на солнцу). 2. Возьмите зажигалку или фен и аккуратно, недолго прогрейте крепежный фланец до состояния мягкости. Не перегревайте пластик! 3. Быстро наденьте теплый козырек на рамку экрана вашей камеры, чтобы он принял точную форму. 4. Подержите 5 секунд в нужном положении и сразу снимите его, чтобы нагрев не повредил дисплей. 5. Дайте детали полностью остыть. Теперь козырек сидит как влитой!

Tags