The source marked this model as adult content.
- Downloads
- 1,911
- Likes
- 959
- Rating
- 4.96
119 models
The source marked this model as adult content.
FLEXI HEADCRAB This little fella is derived from my popular Flexi Sloth . The teeth are quite hard to print and attach (use blue tack or glue) and thus are optional. It looks good without them too! PRINT PARAMETERS Material -…
Slider knob for a Soundcraft, Yamaha or Behringer (probably more) mixer. Tight fit. Print the insert in a different color and glue it on the knob. Printed mine with PrusaSlicer on a Ender 3 V2 with variable layer height and 20% infill.…
We are soon launching a KICKSTARTER ! Assembly documentation can be found here: https://outofmarbles.com/pages/docs This is the hand-cranked version of our bucket lift. Check our other models for motorized version. You will also need to…
I'm designing all my models with sketch up - so I'm not the best 3d designer 🥲 You have to print the part once as it is and once mirrored. I used PETG and it holds up perfect for 2 years now! the flaps could be bigger, but then I wouldn't…
Star Wars Sandcrawler. Updated 1/14/2026 Amazing Sketchfab model by tegnemaskin Fixed for 3d Printing. Added overall .4mm No UV details needed.
One pair of simple wings to attach it to any handcrafted selfmade angel
Cut the headcrab model into 8 pieces so I could print one life-sized on my Ender 5 Plus. I forgot what I scaled it up to. Aim to make it about 2 feet long from front leg to back leg. I painted it with regular old rattle cans off the shelf…
Made for my 100 series landcruiser manual edition. Didn't like the look of the ones you could buy so I made my own. Thought I would share so others can use and not need to buy.
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
This is a remix of Patella's organiser for Woodcraft . Their original models all have square corners which my printer struggles to print without significant warping. Also I wasn't happy needing a bunch of spacers and empty areas in the…
Leave behind a breadcrumb trail with this tiny bookmark. Features Minimal Points right to the last line you read within the page. Bookmark accommodates larger and smaller margins, by reversing clip side. Includes a punch out card bookmark…
Toyota LandCruiser FJ40 1977 Wall Art Silhouette model. Adjustable size. I accept model suggestions.
I followed the Maker's Muse tutorial and extracted this for a small project. This could be cut up and reinforced to be full size, but I have not done that.
Headcrabs are sac-like creatures, the size of a watermelon, with four limbs that allow them to jump up to 3 meters in an
GME MB206/MB207 backing plate contoured to the dash trim in the Toyota LandCruiser Prado 150 for easy mounting. Both left and right side trim variant .stl files are provided, use the correct one for the side you wish to attach the mount…
Just a merge between two great models from Thingiverse. Functional metal free headcrab bottle opener. All credit goes to these guys: Bottle opener Author: https://www.thingiverse.com/skimbal/designs Thing:…
Manufacturing instructions: Material: PLA 3D Printer: FDM 3D printer, average print time 1 hours (0.4mm nozzle, for better details it is recommended to use 0.25mm nozzle) Slicer settings: 0.15mm layer height, no supports on build plate…
This is a simple replacement tab for the air-conditioner vents on a Toyota Landcruiser 100 series. It slots easily onto the horizontal vents, and engages the left-right actuator sitting behind it. I would recommend printing in PETG, ABS…
rozširenie rc auta Toyota LandCruiser 79 (rc car 1/12)
Made to fit the Bamboo Land cruiser. May fit others. Color change G Code below
Why We lost some of the faders to our Soundcraft Series 4 mixing desk, so I removed yet another fader from our desk and modeled this replacement. Features Tested to fit on a Soundcraft Series 4 mixing desk May fit other desks as well…
Needed to fill the holes in the cruiser left over from the previous owner not installing switches correctly etc. I tried to make it match the curved surface, however that was too hard to print so decided on a flat plate. Use this as a…
Rack mount for an 19 Rack for the Soundcraft Ui12 The manufacturer only produces rackmounts for Ui16 and Ui24 Uses 4HE of height PLA and PETG can be used for printing On the right side there are two spaces for XLR-jacks - i use them for a…
A switch panel blank for the awkward shaped fixings either side of the heater controls on earlier (non-satnav) Landcruisers. It may fit other toyota/lexus models? Let me know if so. This is for the LH (passenger side in UK/Aus/Japan) - if…
A single, sculpted 3D‑printed mug in deep matte charcoal, featuring a handle carved into a delicate heart that turns every sip into a quiet love note. Design The cup’s silhouette flows with a gentle asymmetry that draws the eye toward the…
basic dual usb charger made to fit the landcruiser 80 series and was made with a Narva OE STYLE TOYOTA SWITCH - USB 39 x 21mm Part No. 63313BL. might fit the other narva usb chargers but check dimensions first. should clip in and fit nice…
Even Xen aliens celebrate the festive season! To go with my Half Life 2 Headcrab hand puppet , I made a HL2 themed ornament; a headcrab trying its best to couple with a snowman. Well, seems the snowman doesn't take too kindly to the…
Plug for the spare wheel cover mounting anchors that remain when you remove the plastic trim bits on a Toyota LandCruiser Prado 150. The pin inside the plug is a simple friction fit into the plastic screw anchor. I've printed these in TPU…
To get the most accurate result scale up the model to percentage show in picture or use mm the height is depending on your preferences. I used 5 mm for my model height.
This is a low-poly Headcrab model inspired by Half-Life, designed as a shoelace bead or hoodie strings. The model is optimized for 3D printing and can be scaled between 120% to 150% for best results. 🔹 Recommended Print Settings:…
Simple 200x200 laptop stand that reminds me by it's shape on a Headcrab from Half-life (hence the name). It's designed to be printed with tree supports and require around 270gr of filament with those and around 7% infill. Can accept…
You need to print 4 times Additional Player Components and Base Player Components If you like my work, please consider making a paypal payment: https://paypal.me/visar78
Exclusive edition of a HyperX Pulsefire Saga mouse cover, remixed from https://www.printables.com/model/1182217-hyperx-pulsefire-saga-shells-and-buttons-official Feel free to post comments and remixes
Source: https://www.models-resource.com/pc_computer/halflife/model/53931/
A convenient holder for the Fuel Nozzle Pins (thanks to rekrapd for the design, original unmodified file attached as fuel_nozzle_pins_v1.stl to this project in case Thingiverse evaporates) that sits in the fuel filler door on the Toyota…
Put the adapter ring over the hood barrel Screw the hood barrel into the hood Screw the finished lens hood on to the Sony
We needed a in vehicle mount for our work vehicles and radios. I used some of the existing switch holes in the dash that weren't being used and made my own mounting plate. I used two m5 machine screws and 8mm nuts to mount the cradles to…
Reverse engineered window winder for a 70 series landcruiser, with a smiley face… printed from PETG
This is my original 3D printed decorative house , designed as a cozy holder for a tea light or LED candle , complete with a matching lid . The shape is minimalist yet full of character, making it a perfect decorative piece for shelves,…
Crafted with precision, the WindCraft brings the allure of the open sea. Whether you’re a seasoned sailor or simply appreciate nautical beauty, these models are a must-have. Imagine the gentle sway of the sails, the glimmer of sunlight on…
I made an insert to hold everything in Goodcritters nicely. Unfortunately I don't have a large 3d printer so I had to break it up into sections. Category: Games
This is a replacement part for a 1994 Toyota LandCruiser A/C Louver vent. During a recent restoration I found that these parts are not available for purchase and that due to their age, a brand-new replacement louver/vent would have…
If you are using access to 3rd row only from right side of the car you can use step on the left side for this box. Store shackles, straps or other items here. Use velcro tape for attaching box into the place.
My off the shelf reverse camera was blocked by the tailgate so I created this simple model to mount it
A 2mm diameter toothpick is required to complete the build. Parametric Fusion 360 and STEP files are included so dimensions can be adjusted.
Upgrade your LandCruiser’s dash with this precision-designed 3D printable radio and vent trim panel — custom-made for the 78 Series Troopcarrier . This model replaces the original dash section and accommodates a dual DIN head unit with…
As stated above I wanted the bigger knob for the fully printed screw for HDCreators very nice miniature vice, as that was missing from the collection. Please note that I did not design a updated lid for the knob, the original one does not…
Main differential gear for Marui CJ7 Golden Eagle / Toyota Landcruiser Super Wheelie. 60 tooth. Print in ABS/Nylon for best strength. Print Settings Printer Brand: LulzBot Printer: Mini Rafts: Doesn't Matter Supports: Yes Resolution: 0,14…
Idler gear for Marui CJ7 Golden Eagle / Toyota Landcruiser 28t/11t Category: R/C Vehicles
I use this to measure the male mud crabs that need to be 150mm across head in Queensland Australia to be a legal take. Please allow for shrinkage of filament in the printer or in the sun. I'd suggest a 105% print might be a good buffer…
In Germany, it's pretty common to take a handcart loaded with beer for a day out, especially during traditional events. But navigating downhill with cheaper handcarts can get tricky—and potentially unsafe. To address this, I installed an…
This mounting clamp is intended to provide a way to attach a quadlock mount centrally on my Woodcraft clipon adapter plate. The Woodcraft plate features some really neat ribs and holes between them. The clamp fits in the central hole,…
Would recommend you print the following: 20x Blueberry 20x Blueberry 3 10x Blueberry 5 10x Blueberry x
Hello, I have Headcrab from the Half Life game for you. The character is authentic, inspired by the Half Life game. Suitable for coloring. Nice character for diorama or cosplay :-). Happy printing! I used PLA/PETG as the material. Need to…
This is for the awkward shaped blank panel at the side of the heater controls on a non-satnav LC100 and possibly LX470 and other toyota models. Mirror the model for the RH side if required. This is a remix of the “blank” which is on my…
It is a very simple but potentially vital addon for a Voron Trident. What it does: Mechanically limits the movement of the three Z-axes in minus direction as a critical safety measure. Because of bed mesh compensation I'd suggest a…
Remixed from: https://www.thingiverse.com/thing:3747533
DeWalt DCR-020gb radio power cord tidy. Keeps the plug firmly attached to the radio unit when not in use. The printed part replaces the 2 standard lugs using the same screws. Although the photo doesn't show it the plug push fully in.…
A basket that fits a KidCraft play kitchen. Has cutout for the door latches as well. Print Settings Print with at least 3 walls and whatever infill you feel provides enough strength.
Manufacturing instructions: Material: PETG 3D Printer: FDM 3D printer, average print time 30 minutes. Slicer settings: 0.3mm layer height, 6 perimeters Post processing instructions: Clean stringing, install in the car.
requires your own mounting system but that's it!
To suit Toyota Land cruiser 80 Series - Electric Mirror blank with rocker switch cutout to fit a generic or narva type switch. Category: Other
Add spacers for https://www.printables.com/model/376523-woodcraft-box-insert (Should work with https://www.thingiverse.com/thing:5777869 too) Holds game boards in place while transporting. Print 2 or 4 of them.
Landcruiser jump seat hook can break and it is a PITA to stick your hand under the jump seat… This restores the hook/arm functionality making it much easier to deploy the jump seats. Printing: Print on side with something durable.…
Print the adapter as well two alignment pins. The adapter is designed for the Headset insert to be rotated 45° (do rotate the compressing ring as well!). This allows for easy routing of the Brake lines without any bunching. Since I'm…
This is for this handcream alverde NATURKOSMETIK Feste Handpflege mit Sanddorn-Duft, 25 g dauerhaft günstig online kaufen | dm.de as it get quites oily fast in the paper box. Put in a M2x20 through the back and tighten it not too hard,…
"Headcrab" 3d printed housing for my small gbaHD adapters, original model by https://www.instagram.com/8bitdreams/
Adapter for the front speakers of a steel-dash 70 series Landcruiser. This model is a tight fit and can be resized slightly smaller if preferred. The "right" adapter is rotated slightly to allow better access to bolts. Passenger side:…
A smaller and more satisfying to use version of the original Raynox universal clips, specifically for the widely spread Olympus 60mm f/2.8 Macro lens. @Ferdinand_173643 has designed a beautiful Lenshood (Thank you! <3), which I remixed in…
This is a set of 3 wall mounts designed to hold Woodcraft-brand hand planes horizontally: No. 6, No. 4, and a Jack plane. Each mount cradles the tool securely, making it easy to grab while keeping your workspace clean and efficient. The…
CATAN 3D Deluxe Upgrade Set – Community Edition By RAECA Studio https://www.instagram.com/raeca_studio/ Designed in Sydney, Australia, this project represents more than two years of design, refinement and testing. I am releasing this…
Remix from joelllux's 79 series cover, added additional support behind. Fits the space for the electric mirror adjustment on the poverty pack Toyota Landcruiser 80 series without electric mirrors (DX). Category: Other
As i'm uploading this i've noticed I didn't get any pictures of the final VR version or the full scale model I printed but you get the idea. If using the OBJ, make sure to cut a flat base for the print to stick (and maybe scale it down)…
Rear motor cover for Marui CJ-7 Golden Eagle / Land cruiser. Print with support and pins down for best result. Print Settings Supports: Yes Resolution: 0,2 Infill: 10% Category: R/C Vehicles
Front wheel insert for Marui CJ-7 / Landcruiser Category: R/C Vehicles
Modified rear wheel inserts with bigger center lip to prevent the tires from slipping. No glue should be needed. Print Settings Printer Brand: LulzBot Printer: Mini Rafts: Doesn't Matter Supports: Yes Resolution: 0,14 Infill: 50%…
This is an herbalist lady (or long-haired fellow) with a walking stick that I designed and printed to replace the stock pawns for the cooperative herb learning adventure game called "Wildcraft!" This meeple is sized for Meepleverse, Tiny…
Fastener for the rear damper for Marui CJ7 / Landcruiser Super Wheelie Category: R/C Vehicles
had a spare PCB from the KBDcraft Kit Addams laying around and modeled a case for it. enough space to add some foam under the pcb https://kbdcraft.store/products/kit-addams
Model was created for my wife's convenience to improve the grip for all L'Occitane cream tubes. Original cap is quite small and it's not very handy while opening and closing. Model was printed using PLA filament, 0.2mm layer height, no…
The tray is fitted to a standard 105 landcruiser (1998). The model can easily be modified for other applications. The original tray locator was broken. Previous owner had hot-glued it which failed. Original profile was heavily tapered so…
62 mm threaded rear cap (for grip) for Raynox DCR-250 Super Macro Snap-on Lens. Needed something quickly removable that wasn't the default stretchy HDPE cap.
Handcrank from the Roblox game “Industrialist”
I have designed a mounting system to hold Insignia NS-DCR30D3K USB 3.0 Advanced Memory Card Reader, so it's not moving around when you're trying to use it. To fasten the mount you can use double sided tape, use the provided holes, or use…
Angle kit to raise the KBDCraft Adam keypad and keyboard. Mounts on the bottom of the base plate.
A pad for the Rodcraft jack (RH151 and other) to protect the underside of your car. Tested with TPU 98A with 100% (on the pictures) and 50% infill. Can be adjusted in the skech in the f3d.
CB Radio handset mount for toyota Landcuiser prado 250. Print on it's side, clip the bottom underneath the trim and bend the top back a little to clamp it over the drink holder. Needs 2x M3 nuts for the back - just push them into the…
My bar end sliders have taken some abuse but I'm not paying $160AUD delivered (over half a track day!) for some replacements. I don't expect these will be able to perform anywhere near as well as the POM, but I did some testing by…
A small handheld scoop for scraping crumbs off tables or worktops.
Funnel is for crankhandled Coffeegrinder with flat Top. Stamp fits theoretically each Coffeepowder portafilter. Maybe the Stamp .stl needs to be scaled to your Coffetrays inner Diameter in the Slicer. Amount of Infill doesent really…
Quick design of TakuWoodCraft's Block/Jig thing, The Video short is located here, https://www.youtube.com/shorts/vYXmJuWt-mk The plans he shared are here, http://youtube.com/post/UgkxQ0EClvnu8D_zuK3OyY0-J0ofLRkQuq71?si=QsTYMWmutw9SkVAl…
Jawas know a good deal when they see one—and this Sandcrawler is rolling in, glowing like a desert mirage. This latest neon-inspired design captures the rugged, industrial charm of the Jawas' mobile fortress , the massive Sandcrawler. A…
CNC Bit Organizer, designed specifically for IDC Woodcraft bits, but should work for others. Files: Organizer, 2 versions, with and without Gridifinity base. Name plate IDC Woodcraft logo plate Printing: Print organizer at 0.24 layer…
Simple cover for the Keychron V6 Max Keyboard. Two pieces which need to be glued together. Print both files twice. Then join the halves using glue and the plugs. I prefer "uhu hart kunststoff" to do so.
Print in tpu for best results. my account on tinkercad https://www.tinkercad.com/users/fBDvODmbvgV
recommeded to print in tpu. my account on tinkercad https://www.tinkercad.com/users/fBDvODmbvgV
Brake cushion for Land Cruiser Part number 90541-06063 Print in PETG to increase durability