Sturdy 200x200mm Shelf Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A robust, clean-looking 200x200mm shelf bracket designed for high stability, printed in PETG with a reinforced cubic inf
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 25
- Makes
- 0
- Views
- 84
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
A strong, functional, and modern-looking shelf bracket optimized for reliable wall storage.
Dimensions: 200 mm x 200 mm
Screw Holes: 4 mm diameter (countersunk for clean screw placement)
Print Settings & Recommendations
Material: PETG (recommended for strength and slight flex under load)
Wall Loops / Perimeters: 5–6 walls (increases load capacity and overall stiffness significantly)
Infill Density: 40% – 60% (depending on intended load)
Infill Pattern: Cubic (optimal strength-to-weight ratio and structural integrity in all directions)
Bed Adhesion: A 10 mm outer brim is recommended to prevent warping at the sharp corners and ensure solid build plate adhesion.
Supports: None required when printed on its side