1 / 6
Probe Holder Inner Side for Geeetech Prusa i3 SkyNet3d Firmware
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
So I had the problem, that my Prusa i3s sled was slightly bend and the original z probe holder was too far away from…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 14
- Makes
- 0
- Views
- 209
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
So I had the problem, that my Prusa i3s sled was slightly bend and the original z probe holder was too far away from my nozzle. So the nozzle crashed into the bed continuously.
I designed this thing to get the z probe holder closer to the nozzle.
You need to change your screws, the original ones are too short.
You also need to change your x endstop mount. See the picture for example.
Note: This only works with the 4mm sensor, the 8 mm sensor is too big.
Category: 3D Printer Parts