Peristaltic Pump Base for V2 NEMA 17 pump by Maximilian Puschmann
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A stable base for V2 NEMA 17 Peristaltic pump made by Maximilian Puschmann. The base is my own design.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 23
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
A stable base to hold the V2 NEMA 17 Peristaltic Pump originally designed by Maximilian Puschmann.
This base accepts the NEMA 17 pump assembly and holds it flat during use. I designed this because the pump normally sits on top of the motor which is not the most stable setup. It also includes a channel for the power wires.
This base is a relatively loose fit. The pump will simply rest inside the cutout and is easy to lift out. If you want a snug fit around the pump, I suggest printing at 98% scale. Or use some thin rubber pads around the edges of the pump receptacle cutout to snug things up.
The other modification that I made was adding rubber feet to the bottom so it doesn't slide around on the table. I just used some generic 10mm cabinet bumpers for mine. Pretty much any rubber bumper pad will work.