Smith and Wesson 5.7 Wall Display
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall mount for the Smith & Wesson M&P 5.7 (5" barrel) with raised M&P 5.7 nameplate. No supports.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 14
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial
Wall mount for the Smith & Wesson M&P 5.7 (5" barrel). Black backplate with two brackets, one for the slide and one for the grip, plus a raised white "M&P 5.7" nameplate. The pistol lifts straight off.
Print: Bambu Lab H2D, 0.4 mm nozzle, 0.20mm Balanced Strength @BBL H2D, Bambu PLA Basic black (plate) and white (text). No supports. Textured PEI plate (or any smooth/engineering plate with glue). About 5 h 22 min, 191.3 g (190.9 g black, 0.4 g white). The nameplate is painted in the project, so use a 2-color / AMS / dual-nozzle setup.
Mounting: screw it to the wall through the countersunk holes. Use wall anchors in drywall, or screw into a stud. Screws not included.
For display of an unloaded, cleared firearm only. It is a passive holder, not a lock or secure storage. Test the fit with your own pistol first.