1 / 31
Prótesis Transtibial Modular de Bajo Costo (Prototipo) / Low-Cost Modular Transtibial Prosthesis — image 1
1 / 31

Prótesis Transtibial Modular de Bajo Costo (Prototipo) / Low-Cost Modular Transtibial Prosthesis

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Diseño y Fabricación de Prótesis Transtibial Modular de Bajo CostoEste proyecto consolida el proceso de diseño…

Rating
0 / 5
Likes
1
Downloads
1
Makes
0
Views
10
Reviews
0

Updated at source:

Model information

Category
Engineering
License
Creative Commons — Attribution — Noncommercial — Share Alike

Diseño y Fabricación de Prótesis Transtibial Modular de Bajo Costo

Este proyecto consolida el proceso de diseño paramétrico, prototipado iterativo y pruebas preliminares de unaprótesis transtibial (bajo rodilla) fabricada mediante impresión 3D FDM.

El proyecto nació para dar respuesta a un paciente adulto con amputación transtibial unilateral de etiología diabética y recursos económicos limitados, quien requería movilidad asistida ante la dificultad de acceder a una prótesis comercial.

⚙ Características del Diseño

***Modularidad e intercambiabilidad:** El conjunto se divide en subsistemas unidos por acoples mecánicos flexibles de TPU. Esto permite reimprimir o ajustar un módulo (como el encaje, ante cambios de volumen del muñón) sin descartar el resto de la estructura. ***Prevención de lesiones dérmicas:** El diseño del encaje final minimiza costuras internas y bordes vivos. Se proyectó para ser utilizado junto a una funda elástica protectora. ***Imprimible en formato estándar:** Todos los componentes están dimensionados para entrar en el volumen de impresión de equipos de escritorio estándar (230 x 230 mm).

🖨 Parámetros de Impresión Recomendados

***Materiales:** PLA (pie y pilar intermedio) y TPU 95A flexible (cono de enchufe final y encastres).(Nota: No se recomienda PLA con fibra de carbono por el riesgo clínico de desprendimiento de partículas abrasivas en contacto cercano con la piel). ***Altura de capa:** 0.2 mm. ***Relleno (Infill):** 10% para PLA y 20% para TPU, utilizando patrón Giroidal (Gyroid). ***Soportes:** Solo necesarios tipo árbol (tree supports) en los archivos encastre_pierna.stl y Cono_final.stl.

⚠ Aviso Importante (Disclaimer Clínico)

Este diseño se publica estrictamente como unprototipo funcional de desarrollo e investigación en ingeniería, y no como un dispositivo médico certificado ni clínicamente validado a fatiga de largo plazo. La fabricación y adaptación de un encaje protésico —especialmente en pacientes diabéticos o con compromiso vascular— requiere la supervisión de profesionales de la salud y ortopedistas matriculados, así como el uso de medias protésicas o liners de protección cutánea.


Design and Fabrication of a Low-Cost Modular Transtibial Prosthesis

This project consolidates the parametric design process, iterative prototyping, and preliminary testing of atranstibial (below-knee) prosthesis manufactured using FDM 3D printing.

The project was born to provide a solution for an adult patient with a unilateral transtibial amputation due to diabetic complications and limited financial resources, who required assisted mobility given the difficulty of accessing a commercial prosthesis.

⚙ Design Features

***Modularity and interchangeability:** The assembly is divided into subsystems joined by flexible TPU mechanical couplings. This allows reprinting or adjusting a single module (such as the socket, due to changes in residual limb volume) without discarding the rest of the structure. ***Skin lesion prevention:** The final socket design minimizes internal seams and sharp edges. It was designed to be used in conjunction with a protective elastic sleeve. ***Standard printer volume:** All components are dimensioned to fit within the build volume of standard desktop 3D printers (230 x 230 mm).

🖨 Recommended Print Settings

***Materials:** PLA (foot and intermediate pillar) and flexible TPU 95A (final socket and couplings).(Note: Carbon fiber PLA is not recommended due to the clinical risk of abrasive particle detachment in close contact with the skin). ***Layer height:** 0.2 mm. ***Infill:** 10% for PLA and 20% for TPU, using a Gyroid pattern. ***Supports:** Only required (tree supports) for the files encastre_pierna.stl and Cono_final.stl.

⚠ Important Clinical Disclaimer

This design is strictly published as afunctional prototype for engineering development and research, and not as a certified medical device nor clinically validated for long-term fatigue. The manufacturing and fitting of a prosthetic socket—especially in diabetic patients or those with vascular compromise—requires the supervision of licensed healthcare professionals and orthotists, as well as the use of protective prosthetic socks or silicone liners.


🚀 Follow me & Support my work / Mis Redes y Tiendas

Si este diseño te resultó útil para investigación o querés ver más proyectos deMol 3D, te invito a seguirme y apoyar mi trabajo en mis tiendas oficiales:

If you found this design useful for research or want to see more projects fromMol 3D, I invite you to follow me and support my work in my official stores:

***Thangs (Commercial License & Bundles):** @ivanmolleker2025 ***Cults3D:** @ivanmolleker ***MakerWorld:** @ivanmolleker ***Instagram:** @mol_3d_

Contacto para desarrollos e investigación / Contact for development and research: [email protected]

Category: Engineering

Tags