Storage Tray for Aevitas Modular Watch Winder
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€14.20 – €17.35 net (excluding VAT)
For file: Watch Winder Storage_0.4n_0.2mm_PETG_MK4IS_10h39m_bed3.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €15.77 excluding VAT (range midpoint).
- Weight reported by the author
- 326 g
- Print time reported by the author
- 10.65 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A storage tray with shaped slots to fit above Aevitas Modular Watch Winder
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 0
- Makes
- 0
- Views
- 11
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I fully appreciate that this is a rather niche design, made specifically for my own storage needs. This is a tray that sits on top of my set of 6 Aevitas winders and is designed to hold the following items:
Mitutoyo 500-321 Digital Vernier (Cased)
LTT Precison Screwdriver Set
Stanley 5m Tape Measure
Bosch Zamo laser Tape Measure
Spare batteries for the Bosch Zamo
12" Steel Rule
8" Steel Rule
6" Steel Rule
Radius Gauge set (https://www.printables.com/model/137696-radius-gauge-1-20-mm)
3d Connexion SpaceMouse Wireless (Bluetooth edition) in its storage case
3d Connexion CADMouse Compact Wireless in its storage case
Hanging Hook for my Multimeter in its storage case
So yes, a very niche requirement, but I decided to upload this design just in case it gives ideas and inspiration for another design.
I split the model for printing in fusion itself, creating the dovetail connectors. Fits together quite nicely due to the 0.1mm of clearance I added to the side faces of the dovetails and 0.2mm to the top. I also chamfered the dovetail male and female features to allow better fitting.
Happy Printing