1 / 5
Twingo door handle fixation — image 1
1 / 5

Twingo door handle fixation

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

door handle repair of my Peugeot Twingo 1

Rating
0 / 5
Likes
0
Downloads
1
Makes
0
Views
32
Reviews
0

Updated at source:

Model information

Category
Automotive
License
GNU General Public License v2.0

Use a T20 screwdriver to remove the screw in the door handle. When putting the screw back, use very little pressure to engage the threads because the 3D printed plastic fixation can fall into the door. If needed apply a drop of glue on the top side and let it cure.

Critical print settings :

  • orient the print on the chamfer (see image 3)

  • paint seams simmetrically (see image 4)

  • 0.4mm nozzle diameter

  • 0.16mm layer height maximum

  • Wall transitioning filter margin 5%

  • Minimum wall width 5%

  • Minimum feature size 5%

  • 3 walls

  • 0% infill

Use PETG or ASA. PLA will deform in hot weather. 
Optionnal : you can set inner wall line width to 0.5mm.

Tags