Caddx Walksnail Ascent Lite+ VTX Swappable Mounting Pod with Camera Pan
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounting system for the Ascent Lite+ VTX with camera pan ability
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 3
- Makes
- 0
- Views
- 40
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
Print in something with higher heat resistance than PLA. I printed in ASA for lightness, heat and UV resistance.
Attach VTX to the Lite+ AIO Pan with 2 of the short screws included in the kit.
Attach Cam Pan to the servo by pressing it onto the servo splines and then secure with the servo screw. Then the camera attaches to Cam Pan using 2 short screws supplied with VTX.
I use a 270 degree 9g metal gear digital servo. Any 9g should work, but the splines may be too small on plastic gear servos.
The Lite+ AIO Pan attaches to the Lite+ AIO Base with 4* M3 screws.
Glue the Slider Lite+ to the bottom of the Lite+ AIO Base. If you do not need the swapping ability you can leave the Slider off and attach Body Lite+ directly to vehicle. You could also only use the Lite+ AIO Pan if you want to mount it sunk into your aircraft or truck.
Attach the Vehicle-Mount to the plane, truck or whatever using zip-ties, velcro strap or glue.
Slide assembled pod onto the Vehicle-Mount and secure with a long screw included in VTX kit or a M2*6 screw.