Stackable Badgeware Enclosure – Fully 3D Printable
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This modular, stackable enclosure is designed to securely hold a Badgeware board while allowing users to customize and e
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 6
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
The design focuses on simplicity, functionality, and easy assembly. Each section can be stacked to create a taller enclosure, making it adaptable to different setups and preferences. st features of this design is that all screws and connectors are 3D printable, eliminating the need for additional mounting hardware.
Key Features
Fully 3D Printable: All enclosure components, including screws and connectors, can be printed.
Modular Stackable Design: Add additional sections to increase the height as needed.
Secure Board Mounting: Built-in connectors hold the Badgeware securely in position and prevent unwanted movement.
Button Retaining Plate: A separate plate keeps the buttons aligned and securely positioned.
Easy Assembly: Designed to be assembled using printed components without additional purchased hardware.
Customizable: Print in different colors or adjust the number of stacked sections to suit your setup.
Recommended Print Settings
Material: PLA or PETG
Layer Height: 0.20 mm
Wall Loops: 3–4
Infill: 15–25%
Infill Pattern: Gyroid or Grid
Supports: As needed depending on part orientation
Brim: Optional for smaller components
Print Speed: Adjust based on your printer and material
For printed screws and connectors, slower printing speeds and finer layer heights may improve thread quality and fit.
Assembly Instructions
Print the enclosure sections, connectors, screws, buttons, and retaining plate.
Position the Badgeware inside the enclosure using the built-in connectors.
Install the buttons and secure them with the retaining plate.
Connect the enclosure sections using the printed screws and connectors.
Add additional stackable sections as desired.
Check that the buttons operate freely and all components are secure.
Required Hardware
No additional hardware required for the enclosure assembly.
besides the badgeware of course
All mounting screws, connectors, and retaining components are designed to be 3D printed.
Design Purpose
The goal of this project was to create a practical, expandable Badgeware enclosure that is easy to print, assemble, and customize without relying on additional hardware.
Whether used as a desktop display, electronics project, or custom Badgeware setup, the stackable design provides flexibility while keeping the board securely mounted.
note print 2 buttons and 4 screws