M2 dual 40mm ducted fan mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a 40mm bed fan and duct for a Makergear M2 with a v4 head. The usual fan is 50mm, but I wanted dual Noctua…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 198
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
This is a 40mm bed fan and duct for a Makergear M2 with a v4 head. The usual fan is 50mm, but I wanted dual Noctua fans for silent running. I also switched out the power supply fan for a 60mm Noctua and added Astrosyn dampers on the motors. It is crazy quiet now!
If you have a newer model M2 make sure to use a 24v to 12v converter to power the fan. I used a small R/C model buck converter.
Print Settings
Printer Brand:
MakerGear
Printer:
M2
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
.20mm layers
Infill:
30%
Notes:
Print as designed using supports. Make sure that auto-supports do not fill the four mount holes
Category: 3D Printer Parts