Herm Sprenger ClicLock Replacement Jacket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
ClicLock Jacket with Tighter Tolerances
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 3
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Share Alike
I found the original jacket was a little too big. It kept falling off the prong collar like a [Guest] trying to sneak out of the Inn without paying.
So I modeled a new one with tighter tolerances. Inner size is 23.70 mm by 9.20 mm. Much better grip.
The jacket works on all their prong collars. The real difference is the metal part it covers. My 2.25 mm one fits fine in the old jacket, but that same jacket was way too loose on the 3 mm ClicLock. Slippery metal!
Important notes about this file:
No TWI logo
No fuzzy skin texture (the one I printed with and liked)
Shape is a little different. I took away the curve that follows the metal so it prints easier. No fancy curves for the printers today.
The button/nub is bigger. Do not put the jacket on upside-down! The bigger nub will unlock the ClicLock. The old one was more forgiving. This one is not. Be careful.
Needs supports when printing.
I recommend PETG or something strong. This thing has to survive daily wear and tear, not soft PLA that breaks when you look at it funny.
That is all. Print carefully.
The description was assisted with AI—the model was not.
