Dryer hose condensing box with threaded adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Condensing box for a Ø100 mm dryer hose, with a flat lid or a threaded adapter. Fits a 250 × 250 mm print bed, no supp
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 16
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial
3D-printable condensing box for a Ø100 mm dryer hose. It collects the condensation from the humid air instead of venting it out of a window. Every part is sized to fit a 250 × 250 mm print bed.
What’s in the kit
Box: 240 × 170 × 110 mm, 3 mm walls, open on top.
Flat lid: the hose pushes straight into the Ø100 mm hole. This is the simplest version.
Threaded lid + adapter: the hose attaches to an adapter that screws into an M100×6 threaded hub, so you can connect and disconnect the hose without tools. The lid has a lead-in chamfer to guide the screwing, and the adapter has a flange that acts as a stop.
Both lids have a lip that sits inside the box, and ventilation slots for the air to escape.
Note: modeled in Fusion with help from Claude for the scripts, then checked and adjusted by me.
Made with Fusion + Claude. Yes, I got lazy. 😄