Dryer hose condensing box with threaded adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Condensing box for a Ø100 mm dryer hose, with a flat lid or a threaded adapter. Fits a 250 × 250 mm print bed, no supp
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 16
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
3D-printable condensing box for a Ø100 mm dryer hose. It collects the condensation from the humid air instead of venting it out of a window. Every part is sized to fit a 250 × 250 mm print bed.
What’s in the kit
Box: 240 × 170 × 110 mm, 3 mm walls, open on top.
Flat lid: the hose pushes straight into the Ø100 mm hole. This is the simplest version.
Threaded lid + adapter: the hose attaches to an adapter that screws into an M100×6 threaded hub, so you can connect and disconnect the hose without tools. The lid has a lead-in chamfer to guide the screwing, and the adapter has a flange that acts as a stop.
Both lids have a lip that sits inside the box, and ventilation slots for the air to escape.
Note: modeled in Fusion with help from Claude for the scripts, then checked and adjusted by me.
Made with Fusion + Claude. Yes, I got lazy. 😄