€7 Binocular Indirect Ophthalmoscope: 4 mirrors, no lenses, no electronics
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A printed four-mirror box that turns a €5 headlamp and your own 20 D lens into a binocular indirect ophthalmoscope. Slid
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 0
- Makes
- 0
- Views
- 8
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Medical Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
What it is
A binocular indirect ophthalmoscope (BIO) needs two things:
light into a dilated pupil;
the examiner's two eyes "squeezed" close enough together to look through that same pupil.
This model does the second job with just four pieces of ordinary household mirror in a printed box: two tiny periscopes. The light comes from a cheap zoom headlamp (we used a €5 one), and you use the 20 D lens you already have.
Our total cost was about €7: headlamp €5, mirror €1, plus about €1 of filament.
It started as an answer to the excellent 3D-printed BIO by Hwang et al. (J Ophthalmol 2025). Building that one in Europe meant importing electronics and optics from China, and customs and shipping made it expensive and slow. After several versions (adjustable mirrors, eyepiece lenses, prisms) we went back to basics: if the lamp and lens are things you already have, the only part a BIO really needs is the mirrors.
How to choose your files
Find your glass thickness. Print the three
0_TEST_slot_testpieces; the dots on top show the version (1 dot = 1.3 mm, 2 dots = 1.45 mm, 3 dots = 2 mm). Push a strip of your mirror into each, and use the version where it slides in with a light grip. No printer test? Stack 10 pieces and measure: 13 mm means 1.3, about 14.5 mm means 1.45, 20 mm means 2.Choose a mount:
HEAD_…: the box hangs from the headlamp, so it always points where the light points.lid_snap_for_33mm_lamp+TPU_linerfits a lamp with a round 33 mm barrel.lid_universal_strapfits any round lamp of about 20–50 mm, held with a 20 mm velcro strap or elastic.
EAR_…: worn like glasses (box + plain lid + 2 temples + 1 nose pad), with the headlamp on your head just above it.Temples: S, M or L (92, 102 or 112 mm from the hinge to the ear bend). M fits most adults.
Nose pad: low, mid or high. Pick the one that puts your eyes in the middle of the openings.
Cut 4 mirrors 29 × 13 mm. Anything from 28–30 by 12–14 fits.
0_TEST_glass_cutting_squarehelps you cut square: hook it on the glass edge and score along the ticked edge.
Print settings
0.2 mm layers, 4 walls, 20% infill, no supports. Every part is already oriented for printing.
PLA or PETG; PETG is better for the snap lid and temples.
TPU for the parts named
TPU_(all optional except the liner for the snap lid).The universal lid's strap tunnel has a 22 mm bridge.
Assembly
Lid off. Painted side of the mirror toward the solid side of each slot, shiny side toward the middle of the box.
Slide each mirror down until it stands on the floor, then push it toward the middle of the box until it stops.
Too tight: shave the small rib in the slot.
Loose: tape on the front of the glass at its ends, never behind it.
Screw the lid on with 4 × M3×8; the screws cut their own thread. Ear version: 2 × M3×10 per temple.
Look at something 3 m away. You should see one image, and it should not jump up or down when you close one eye and then the other.
Good to know
No eyepieces: your eyes focus at about 45 cm (your working distance with the 20 D lens). Use reading glasses if you need them.
Designed for an eye spacing of about 64 mm; it works best from about 61–67 mm.
With a 33 mm lamp right above the box, the patient needs a dilated pupil (about 6 mm).
⚠ Safety: please read
This is not a certified medical device. The light from a hardware-store headlamp has not been measured for eye safety. Test on a model eye first, at the lowest brightness that works. Have the light checked against ISO 15004-2 / ANSI Z80.36 and follow your local rules before any use on people.
License: CC BY-NC-SA 4.0. Free to print, change and share, but not to sell.
