Skadis Hotend Holder - 4 Labelled Pockets, Snap-Lock
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Four spare hotends in labelled pockets (0.2, 0.4, 0.6, 0.8) on your IKEA Skadis pegboard.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 0
- Makes
- 0
- Views
- 2
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Standard Digital File License
Four spare hotends in labelled pockets on your IKEA Skadis pegboard!
The tray has four pockets labelled 0.2, 0.4, 0.6 and 0.8 and sits on two snap-lock brackets 120 mm apart. A window at the front of each pocket lets you grab the hotend.
Features
4 pockets 28 x 17 mm, 24 mm deep
Labels 0.2 / 0.4 / 0.6 / 0.8 inlaid on the front
Tray lifts off the brackets - take the whole set to the printer
Snap-lock brackets - click into the board, no tools
One STL per colour
Print settings
PLA or PETG, 0.4 mm nozzle
Multicolor print: body, labels and clips in separate colours
No supports
What to use it for
Spare and specialty hotends by the printer
Keeping nozzle sizes apart
Printer corner on a pegboard
Print & Enjoy!