Generic squash ball feet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Yet another set of squash ball feet for your printer...
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 108
- Makes
- 1
- Views
- 517
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
I quickly modified a couple of popular models of squash ball feet because i found out that if you move the printer without lifting it enough, the grip it makes onto the surface might break them off, especially if you glue them without screwing on the chassis (like i did). So i increased the surface they make contact through, so that it reduces the lever in the case it grabs too hard when you move the printer. I advise both a little bit of glue and a screw.
Print Settings
Printer:
Artillery 3D Sidewinder X1
Supports:
No
Resolution:
0.3 mm
Infill:
20% cubic
Filament:
eSun PETG
Notes:
Printed with hollow hemisphere side up