Tiagra Lever Spacer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is my Tiagra spacer for older levers. these are like gold dust to buy and not cheap. tis however is a spacer that…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 107
- Makes
- 0
- Views
- 684
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is my Tiagra spacer for older levers. these are like gold dust to buy and not cheap. tis however is a spacer that will move the lever roughly 1cm nearer to the rider and not compromise wheel removal on wither side.
These are not perfect but work well. Just remove the old rubber stopper and clip these in.
You need to just mirror the STL for the opposite side as they are the same layout.
I recomment 100% infill as I found it would deform pushing in the back pin that is tight to ensure it stays in place when you brake.
Print Settings
Printer:
Sapphire Plus
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
100
Filament:
Unbranded PLA
Black
Category: Sport & Outdoors