Gear Pump
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Gear Pump with mountable housing Hey folks, This is one of my first projects that I had to create while studying at…
- Rating
- 0 / 5
- Likes
- 55
- Downloads
- 305
- Makes
- 0
- Views
- 3,224
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Engineering
- License
- Creative Commons — Attribution — Noncommercial
Gear Pump with mountable housing
Hey folks,
This is one of my first projects that I had to create while studying at the technical college.
The gear pump has a rotating and a driven axle (red), which are mounted in brass press bearings (white).
The housing cover and drive axle are sealed by two seals that I printed in the model with black flex filament.
After completion, I tested the printed pump, it is even pumped, however, far less than previously calculated.
This is probably due to the greater deviation than in a CNC machined, on the other hand also to leaks in the drive axle.
The pump is therefore rather intended as a model.
have fun cheers,
Steffen ;-)
Print Settings
Printer Brand:
MakerBot
Printer:
MakerBot Replicator 2X
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0,2 mm
Infill:
10%
Notes:
The case and lid were printed in blue with the best possible resolution and 10% infill.
The drive part, such as axles, gears in red with a resolution of 0.2mm & 10% Infill. Press bearing in white with 0,2mm & 15% infill.
The seals (frontplate and drive axle) were printed with black flex filament in 0.2mm and 100% infill, as they are very small and optimally durable for the model purpose.
Category: Engineering