ITEM light 4080 3-way-connector right side
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
ITEM 4080 3-way connector right side This 3-way connector for 4040 / 4080 profiles was designed for a DIY laser cutter…
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 49
- Makes
- 0
- Views
- 265
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
ITEM 4080 3-way connector right side
This 3-way connector for 4040 / 4080 profiles was designed for a DIY laser cutter project.
It easily connects three ITEM profiles to each other, which can be attached with four M8 x 20mm inner square screws.
(+) very precise and form-fitting
(+) no twisting of the profiles
(+) high stability if the infill is increased accordingly
(-) only ITEM light profiles, otherwise all positive points will get worse
Part mirrored for the left side: https://www.thingiverse.com/thing:2769261
Print Settings
Printer Brand:
MakerBot
Printer:
MakerBot Replicator 2X
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0,2 mm
Infill:
min 20%
Notes:
The connector was printed in a resolution of 0.2mm to ensure the accuracy of the connection.
The infill was set to 20%, which has given a good stability, but can be increased as needed to get a higher stability.
Category: Parts