Raspberry Pi and 5 Inch Display Case Back with Tab for Husky portable work table
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I added a tab that fits in the slot on the worktable I'm using for my printer enclosure.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 53
- Makes
- 0
- Views
- 1,519
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I added a tab to the back of the Raspberry Pi and 5 Inch Display Case by Neddy. It was the easiest way to mount to the table I have my printer enclosure on.
PETG 0.2mm or 0.3mm layer height.
I was unsure how the overhangs would be handled at 0.3, so mine is in 0.2mm layer height.
Print with the tabbed back on the build plate to avoid needing supports. I also tried to match all three openings for the Raspberry Pi. One of the USBs was not fully exposed, so I widened it a bit.
NOTE: This is only the back of the case. I didn't need to modify the front for this additional mount. Please see the original model for the front piece.