Spool Idler - FormFutura Standard Cardboard Spool
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Carboard Spool Idler Ring 55~56mm Spool Idler - FormFutura Standard Cardboard Spool
- Rating
- 4.818 / 5
- Likes
- 42
- Downloads
- 243
- Makes
- 12
- Views
- 1,331
- Reviews
- 11
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
RC-1.5 - 26 Januari 2021
Did some minor tweaks to the model, no need to trash the previous one if printed.
RC-1 - 14 November 2020
Do you use FormFutura's, DSM or Mitsubishi Filaments?
You know these are all on cardboard spools with a bore (hole) diameter of 55~56mm.
The cardboard spools give a lot of friction and or wears down and leaves super tiny particles of cardboard everywhere, like dust... And it's annoying... Well SAY NO MORE!
Print 2 of them and you are eliminating the problem. If it's too tight just press harder, it's not your grandma, it has a very, very snug fit so it won't come off.
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
15% Grid