1 / 2
4 Inch Duct Support
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Support for 4 Inch Duct to the Wall. Original has one screw, but if need beefier one now have a two screw model.
- Rating
- 5 / 5
- Likes
- 49
- Downloads
- 196
- Makes
- 3
- Views
- 810
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
Have a floor vent that is behind a bed. There is a T coming from the floor vent to both sides of the bed to heat/cool the room. Decided to add some support to the 4 inch round duct on both sides. This uses a #8 screw into plastic wall anchor.
Added a 2nd Beefier Version of the same model. This one has two screws and made a little stronger at the bottom wedge.
Uses 3.52m of filament and takes 1h6m at 0.2mm Quality.