Toy Train Union Pacific BRIO / IKEA compatible
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.92 – €2.34 net (excluding VAT)
For file: union_pacific_adi_02mm_pla_mk3_2h15m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.13 excluding VAT (range midpoint).
- Weight reported by the author
- 24 g
- Print time reported by the author
- 2.26 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Union Pacific toy train (BRIO / IKEA compatible) You will need 10 screws to put everything together.
- Rating
- 5 / 5
- Likes
- 174
- Downloads
- 586
- Makes
- 3
- Views
- 4,316
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial
Union Pacific toy train (BRIO / IKEA compatible). This is the older model with 2 types of screws - the newer ones are far better designed and use only 1 type of screws for everything (check the link to my premium toy trains below).
You will need 10 screws to put everything together.
8x ISO 14585 2.9mm x 13mm (https://amzn.to/3WgKty1)
2x ISO 14585 2.9mm x 19mm (https://amzn.to/4dcUVgP)
I may earn a commission on qualifying purchases (at no extra cost to you)
You can add magnets on each side of the tank car by using 2x ISO 14585 2.9mm x 13mm screws a plastic washer and small neodymium ring magnets diameter 10mm outer / 4mm inner with height of 5mm. (https://amzn.to/3YdC6G4)
The GCODE contains 2 filaments color changes at 2.80mm (Layer 24) and 16.80mm (Layer 141) and the support enforcer.
If you enjoy these models and want to support me, check out my other toy trains with wagons, here. Thank you! Lovely 3D printed Toy Trains
Print instructions
Add support enforcer for the roof! See image above where to put it.
The GCODE already contains 2 filaments changes at 2.80mm (Layer 24) and 16.80mm (Layer 141) and the support enforcer. Printed with Prusament PLA Silver, Yellow, Galaxy Black.
Copyright:
All my designs are protected by copyright. By downloading, you agree to use the files for personal purposes only. This means that you do NOT have the right to sell 3D prints of the digital files, including selling products made from molds.
If you want to sell my prints commercially and legally, you can join my Patreon:
https://www.patreon.com/technerd863
The digital files (STL and other formats) may never be resold, shared, remixed or given away.