Vase Mode, Snap-Fit Shower Shelf
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
When you need more shower shelf you print more shower shelf!
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 55
- Makes
- 0
- Views
- 399
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Our shower has grab bars but not enough shelves, so I designed this print to snap onto the bar and provide more shelf space. Works great!
Bars on my shower appear to be fairly standard: grab bar is 50mm away from the wall, and the bar has a diameter of 25mm. You might need to scale on the Z axis if your printer has less than 300mm capacity.
Prints strongly in vase mode using a 1.2mm extrusion width, 0.3mm layer height, with a 0.8mm nozzle on my Ender5Pro (stock extruder and hot end). Results in ~2.25mm finished thickness. Shown here in 3DFuel ProPLA, 230 on the nozzle, 60 on the bed. I have stock cooling, so I limit by prints to 10mm3/s. If you have a big nozzle and better cooling you can probably knock this out much faster.
Hope this keeps you from dropping the soap!