Vase Mode, Snap-Fit Shower Shelf
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
When you need more shower shelf you print more shower shelf!
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 399
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Our shower has grab bars but not enough shelves, so I designed this print to snap onto the bar and provide more shelf space. Works great!
Bars on my shower appear to be fairly standard: grab bar is 50mm away from the wall, and the bar has a diameter of 25mm. You might need to scale on the Z axis if your printer has less than 300mm capacity.
Prints strongly in vase mode using a 1.2mm extrusion width, 0.3mm layer height, with a 0.8mm nozzle on my Ender5Pro (stock extruder and hot end). Results in ~2.25mm finished thickness. Shown here in 3DFuel ProPLA, 230 on the nozzle, 60 on the bed. I have stock cooling, so I limit by prints to 10mm3/s. If you have a big nozzle and better cooling you can probably knock this out much faster.
Hope this keeps you from dropping the soap!