1 / 1
Ladder foot 62x20 profile
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Both feet on my ladder disintegrated due to UV exposure. I decided to print replacements.
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 56
- Makes
- 1
- Views
- 266
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
Printed it with ASA 100% infill on 0.8mm nozzle with 0.4 layer height. I still need to print the other foot and test it but it turned out very solid. The only concern is poor layer adhesion with ASA. I will add how they hold up later. If you live in a cold weather climate definitely use PLA.