1 / 5
1/4" hex bit holder. Double-sided. Magnetic.(Customizer)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model inspired by Magnetic Bit Holder - Parametrized by Nudel_P. I made it double-side and add customized…
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 95
- Makes
- 1
- Views
- 1,004
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- GNU General Public License v2.0
This model inspired by Magnetic Bit Holder - Parametrized by Nudel_P.
I made it double-side and add customized inscription.
Customizable options:
- Number of slots on one side.
- Inscription.
Instructions
You need:
- 3 x printed part
- n x magnets d=8 h=1 (n - number of bits on one side)
- 2 x M3x20 screws
- 2 x M3 nuts
The 8mm megnets still available at DX.COM: Super-Strong Rare-Earth RE Magnets (8mm 20-Pack)
Building instructions:
- Place the magnets in the middle part.
- Insert the nuts into the slots temporarily using a wide washer (M3, DIN9021) and M3x20 screw. Then remove screws and washers
- Turn the middle part according to the inscription.
- Assemble the holder using screws M3x20.
P.S. English is not my native language. Text corrections are welcome.
Category: Tool Holders & Boxes