1 / 5
13mm Flux syringe plunger — image 1
1 / 5

13mm Flux syringe plunger

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Syringe plunger with 13mm end for use in 10cc Amtech flux tubes. I was fed up with trying to use a pen or my finger to…

Rating
5 / 5
Likes
39
Downloads
448
Makes
8
Views
1,598
Reviews
6

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution

Syringe plunger with 13mm end for use in 10cc Amtech flux tubes. I was fed up with trying to use a pen or my finger to push out flux, so I designed this!

I recommend orienting the large end of the plunger to sit on the print bed so there is less overhang. I have also made a version with a tapered end so it can be printed without supports.

Print Settings

Printer Brand:

RepRap

Printer:

Prusa i3

Notes:

If using the regular STL, make sure you have support enabled. Otherwise, you can use the No Overhangs version, just make sure that the wide end of the plunger is sitting on the print bed.

Category: Electronics

Tags