1 / 5
Modified EZABL Cr10s Direct Drive with Bondtech Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The original EZABL mount did not leave enough threads on the 18mm EZABL pro sensor to allow me to adjust for the 2mm…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 17
- Makes
- 0
- Views
- 178
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
The original EZABL mount did not leave enough threads on the 18mm EZABL pro sensor to allow me to adjust for the 2mm height distance from the tip of the extruder nozzle. I created the attached file from scratch to accommodate my problem.
Print Settings
Printer:
Creality CR10S
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
15%
Filament:
any Tough PLA, PLA Pro
any
Notes:
I used tough PLA for my print but, you can use whatever works for you.
Category: 3D Printer Extruders