Emergency Button Desk Stand for Industrial Actuators
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Button desk stand for industrial actuators with 22.5mm hole diameter. It has the option for built in Neopixel lights.
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 16
- Makes
- 1
- Views
- 411
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a desk stand for 22.5mm industrial actuators. It has the option to mount Neopixels to illuminate the actuator from below.
Following parts need to be printed:
1x Base Plate
1x Base Lid
1x Base Zylinder
- Choose Variant with our without threaded M4 inserts. Print “upside down” with the flat part facing the printbed.
1x Top LED Carrier
1x Reflector Insert
- Not required if you print the Base Zylinder in a bright color.
1x Top Cover
- Choose one of the 4 supplied Text options.
4x Side Walls
- Choose one of the 3 Side Wall Variants (Variant 2 is pictured above, Variant 3 is flush with the top).
Following parts are required additionally:
1x Industrial Actuator designed for panel nounting in 22.5mm holes
4x M4x16 bolt with 16mm lenght*
4x M4x8 bolt with 8mm lenght*
4x M4 threaded insert (optionally print the Base Zylinder (no Inserts) file if you do not want to use inserts)
1x Glue depending on your printers tolerances, a bit of glue helps to fix the side walls to the base
*you can use M4x16 screws for both, or you can use longer screws like M4x20