Ender 3 Pro Print Head
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ender 3 or (Pro) Printhead Fan, selfmade Printhead, !!!!!!!!!!!!!!!!!!!!!!!!!! will only work with linear guide on X…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 37
- Makes
- 0
- Views
- 1,362
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
Ender 3 or (Pro) Printhead Fan,
selfmade Printhead, !!!!!!!!!!!!!!!!!!!!!!!!!! will only work with linear guide on X Axis.!!!!!!!!!!!!!!!!!!!!!!!
Also you may have to rename it and get rid of the ä.
Many printers dont like them :D
Partcooler is now an 40mm Noctua Fan.
Will work with any Fans.
I serial attached the Partcooling fan with my Raspberry Pi fan.
The Hotend Cooler is serial with the Mainboardfan.
So i was able to use the 12v Fans without any electical crims crams.
You have to print it little rotated to the big radius on the bottom.
Make sure you disabled supports in the Model.
See Picture from Cura.
This is an newer version of mine.
I never Printed it but it only have slightly improvements.
Like an screwhole on top left.
Works with BL-Touch (you have to relocate the BLT in the Firmware).
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Yes
Supports:
Yes
Resolution:
0,28
Infill:
15
Filament: Filamentworld PLA White
Notes:
Make sure you havent supports in the model!
Category: 3D Printer Parts