1 / 17
[WIP] CR10 standalone case (splitted)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This remix is currently 'work in progress' Surely a few things might change in the future ;) 2022-03-17…
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 50
- Makes
- 0
- Views
- 917
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
**This remix is currently 'work in progress'
Surely a few things might change in the future ;)**
2022-03-17
LVC_SKR_1.3_1.4_PI4B_V3
- SSR passage position should be corrected, not printed/tested yet
- RaspberryPi standoffs redesigned to avoid the formerly needed support
- removed some holes at the split for an easier printing without support for the SSR hole
Danger letters v1
- Z axis extended to 1.2mm
SolidState_Cap_V2
- Widened the cap +2mm (maybe more is needed, will test later)
2022-03-16
Box_High_VoltageV3-_Meanwell
- reworked the high voltage box to fit a Meanwell SP200-24 power supply
- changed the hole for the SSR to fit better to the alternative power supply
- removed some holes at the split for an easier printing without support for the SSR hole
Cover_high_voltage_V3_1
- deepened the letters to 1mm and widened them 0,1mm at the edge so it's possible to press in the letters (i've expanded them to 1,2mm in z)
Cover_high_voltage_V3_2
- Widened and added additional air vents to make sure the power supply will get enough air
**Attention!
The low voltage box has to be reworked too, because of the changes made to the high voltage box regarding the SSR.**
Category: 3D Printers