F3 Keyring - Formula 3 Logo Contoured (Raised)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.32 – €0.39 net (excluding VAT)
For file: F3_Contour_Keyring_28m_DEFAULT PLA @210c_0.10mm.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.35 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 28.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Keyring/Keychain/Key Fob with raised Formula 3 logo.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 21
- Makes
- 0
- Views
- 182
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
F3 logo contoured keyring with raised logo.
Simple keyring that can be printed in single or multiple colours.
Keyring is approx 2mm thick with a 1mm extruded logo making it light, sturdy and quick to print with minimal filament.
For best results I recommend printing at 0.10mm or 0.12mm quality.
0.20mm will work too but the finish may not be as clean.
(If you wish to print in multiple colours don't forget to add filament changes when slicing the file to make your life easier.)
Perfect for those moments when you have a small amount of filament left!
If you enjoy this print then please do share your make, I would love to see what colours and filaments you chose for your print.
If you have any questions about 3D printing, whether it be queries or you need some tips or tricks feel free to reach out in the comments or by message, I am always more than happy to help if I can!