1 / 6
ZARIBO Y to MGN12
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For this mod, you don't have to change the firmware and you don't loose print height. I used 2 x 400mm mgn12 Linear…
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 42
- Makes
- 0
- Views
- 465
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
For this mod, you don't have to change the firmware and you don't loose print height.
I used 2 x 400mm mgn12 Linear rails
and 3 x mgn12 Bocks
I had to take apart all blocks. clean it and put new grease in it.
But i knew that before. so, no surpise.
i think, these rails and blocks are ok.
update 1
Added STEP-files
update 2
Added rail calibration tool
Category: 3D Printer Parts