1 / 1
Push and Pull Rotary Encoder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a file for making a push and pull rotary encoder. Needed: Rotary encoder, 2 tactile push buttons, 1 knob.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 110
- Makes
- 0
- Views
- 1,511
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
This is a file for making a push and pull rotary encoder. Needed: Rotary encoder, 2 tactile push buttons, 1 knob. You need to first install 2 push buttons on the inside of the extruding walls. Then install a rotary encoder on one end and then close it.
Layer height: 0.2mm
Nozzle: 0.4mm
Raft: recommended but not required(required for stick)
Supports: No on stick, yes on Housing