RatRig V-Minion Y-idler 13x18 mm and 14x15 mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of the V-Minion Y-idler printed part (ABS optimized from Vector3d) which utilizes either a 13x18 or 14x15 mm idler
- Rating
- 1 / 5
- Likes
- 10
- Downloads
- 69
- Makes
- 0
- Views
- 564
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
JonS has adapted the Y-idler part to fit a larger idler (13x18 mm). Since I had a 14x15 mm idler and I wanted to test the great ABS optimized RatRig V-minion parts from Adam - Vector3d (https://github.com/AdamV3D/RR-V-Minion-Mods), I have adapted the y-idler accordingly. Even with the 14x15 mm part there is room up to an OD of 18 mm. I added 0.5 mm space for the idlers in the parts. These can be easily removed again in the provided step file, if desired. I have already exchanged the part and it works very well so far. It can be printed with the recommended settings from RatRig (face down as provided) - you probably have to adjust the shrinkage of your filament (if printing with ABS/ASA)
v2: slight modification for the 14 mm wide idlers e.g. from Mellow
Be aware that there are two different versions - depending on the width (13 mm or 14 mm). There's also a step-file or you can contact me if you can't fit the idler.
Mod from JonS:
https://www.printables.com/model/203692-rat-rig-v-minion-modified-y-idler-block-for-18mm-o