Fridge Counter
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.62 – €0.75 net (excluding VAT)
For file: fridgeCounter10mm_PETG_MK3S.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.69 excluding VAT (range midpoint).
- Weight reported by the author
- 8 g
- Print time reported by the author
- 44.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Fridge Magnet 0-9 dial counter.
- Rating
- 4.5 / 5
- Likes
- 53
- Downloads
- 247
- Makes
- 3
- Views
- 2,862
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
This is a fridge magnet with a captured dial that can be used to keep count of anything you want to track. Print two to cover 0-99, etc.
There are two versions. One large one that takes a 1/2" x 1/8" magnet and a smaller one that takes a 10mm x 3mm magnet.
The gcode includes two color changes. Start with primary color. First change is for the weave and text color. Second is the face color around the text (typically same as primary color).
I recommend the following print setting overrides:
- Set elephant foot compensation to zero (Print Settings→Advanced).
- Increase bridge flow ratio in the same menu to 1.5
- Force bridging angle to 180 degrees (Print Settings→Infill)
There is a similar model configure for days of the week here:
https://www.printables.com/model/216166-weekday-pill-etc-reminder