1 / 1
2040 Y axis stepper mount ender extender ender3 V1.2
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Alternative stepper mount for the ender extender for the original ender 3
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 41
- Makes
- 0
- Views
- 851
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
Y Axis stepper mount for 2040 extrusion.
Requires:
- The original stepper mount from the ender3 y-axis
- Bearing, you can get one by cutting up a spare extrusion wheel
- Two M5 heat inserts
- Two M5 bolts
- Two M3 bolts
This fixes the problem where the original ender extender stepper mount melts over time when the stepper gets hot.
Update: v.1.1/12-06-2022:
After a while the bearring came loose so i made a few adjustments:
- Moved bearring to the other side
- Tighter tolerances: bearring has to be pushed in with some force
- Moved stepper closer to the bearring so it has more support on the other side of the axis
Update: v.1.2/20-07-2022:
Again, the bearring came loose :/ won't happen anymore with this update
- Included bearring lid with self tapping screws
- Endstop in this model, should work with the original bed carriage, if not i'm happy to remove it on request
How to print
- Place the print with extrusion mount flat on the bed
- 50% infill