USB LED bar holder motion activated
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I needed a lightsource.
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 20
- Makes
- 1
- Views
- 308
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
THE FULL HEIGHT OF THE PRINTER CANNOT BE USED with this mod.
I remixed voyczech's design, to make a 3mm hole for mounting bracket, and added Prusa style holes for zipties. I think i made it a bit more thin. I asked for his permission, but i would like to thank him here as well. Open-source ftw.
There is two separate model, one is without ziptie holes, obviously the noziptie one. I included step and f3d file if anyone wishes to modify it more.
Ziptie holes were a bit small on my first print, did not print the second time, but increased hole size, please give feedback. It is suitable for the smallest ziptie.
Printed from Prusament Orange PETG. I dont think PLA is good but let me know.
The used LED bar:
Used the smallest LED bar(300mm)
https://www.aliexpress.com/item/4000545987772.html
Here is a store link in case they take down the listing:
https://www.aliexpress.com/store/1759370