1 / 5
Creality CR-10 All-In-One (AIO) Prusa Style — image 1
1 / 5

Creality CR-10 All-In-One (AIO) Prusa Style

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Creality CR-10 Pruse i3 style. Everything is stock except BTT SKR V1.3 board. Magnets and heatset inserts used. Rewired.

Rating
0 / 5
Likes
8
Downloads
49
Makes
0
Views
344
Reviews
0

Updated at source:

Model information

License
Creative Commons — Public Domain

WORK IN PROGRESS (but may work for you, it did for me)

The objective is to 
  • mount the LCD up front but not in the way.
  • house the control board, mosfet and fans in the rear
  • attach the power supply in the rear
  • easy access to panels via magnets

Magnets (To glue on the lids and cases)
 https://www.amazon.com/gp/product/B07QG8FR8R/

LCD cable

https://www.amazon.com/gp/product/B00XP58LLC/

Heat-set inserts (most places where there are holes)
 https://www.amazon.com/gp/product/B07LBQRYR3/

Wire loom (route all the wires)
 https://www.amazon.com/gp/product/B07FW3GTXB/

Will need additional wiring, crimps, connectors, superglue, and fasteners.

Not for beginners.

Additional notes:
  • Some of the heat-set inserts were difficult to install.
  • The power supply holes for the power plug and power switch need to be larger by about 2mm, I just trimmed them manually. Step files are included so alterations can be made.
  • There are plans to add a cable chain for hotend wires but it is not in the works currently

CAD Videos

Partially Assembled

Completely Assembled

 

Tags