PLA0274 adaptor for battery
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An adapter for the R series batteries sold by JAG35. Replaces the PLA0274 female connector with a plug.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 31
- Makes
- 0
- Views
- 593
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Public Domain
The batteries sold by JAG35 are nice except for the hard to find connector. This replaces the female PLA0274 ( and possibly the PLA0239 with a plug that you can fit wires out of for your choice of connectors like the easy to find XT60.
Printed in PETG so it can survive summers in Florida. PLA tends to get rubbery here in late summer. Mine was printed at 40% infill with 1.6mm walls and top and bottom. Does not use much filament .
There are 4 Phillips screws at the front that need to be removed to access the wiring and replace the female connector. Since you are dealing with fairly high amperage you do need to be careful. If you are not comfortable working on ebike batteries I'd advise you to have someone do it for you.
NOTE!!
Took one of the batteries apart and was reminded that a slot was needed for the base of the adapter. I cut the offending piece of plastic out of the way but you might want to leave it. I have uploaded V2 with a slot added. Also added one with a hole for 12 AWG silicone wire. The original is 14 AWG. It is a very tight fit, V shape the end of the wire and force it in. You can file the hole or modify the print to make the hole larger if desired,