2" CAP OIL DRUM / BARREL - FOR PUMPING OIL USING COMPRESSED AIR OR 1/2" TAP INCH
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
PLEASE TEST THIS ITEM AND POST A MAKE OR COMMENT IF YOU FIND THIS THING USEFULL SO IT COULD BE MODIFIED IF NECESSARY…
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 198
- Makes
- 2
- Views
- 855
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
PLEASE TEST THIS ITEM AND POST A MAKE OR COMMENT IF YOU FIND THIS THING USEFULL SO IT COULD BE MODIFIED IF NECESSARY
LIKE SHARE COMMENT, it is important
Description:
This is intended to be a oil drum cap for pouring / pumping liquids with using workshop compressed air. Other 2 configurations are just for kicks
Additional items that you may need:
- 16mm copper pipe with 180°ish bent on top and long enough that reaches the bottom when the cap is tightened
- automotive tyre valve assembly-cut and glued in place
- oring 15x2.5mm (optional)
- glue
Or use other materials that you have at hand
UPDATE: added models with longer threads, test and let me know what you think
Take a look at my other designs:
https://www.printables.com/social/296116-the-sloppy-apprentice/models
https://www.thingiverse.com/thesloppyapprentice/designs
Take a look at my youtube channel:
https://www.youtube.com/channel/UCqKU0euRjGItYjY0grGPFjw
Print Settings
Printer:
SPONSOR MY PRINTER
Rafts:
No
Supports:
No
Resolution:
0.2-0.25
Infill:
15-35%
Filament:
Frog guts PLA-ABS
Goo
Notes:
Print top side down, threads benefit from higher resolution and more wall/top/bottom count, no supports needed, I generaly use brim for better plate adhesion and to eliminate warpage
Category: Automotive